D-Link DXS-3250 - xStack Switch - Stackable Web/Installation Manual Download Page 230

Page: 230 / 311

Configuring System Time

Defining SNTP Global Settings

Page 228

Defining SNTP Global Settings

The

SNTP Properties Page

provides information for defining SNTP parameters globally. To define SNTP global

parameters:

Click

System

SNTP

Properties

. The

SNTP Properties Page

opens:

Figure 146: SNTP Properties Page

The

SNTP Properties Page

contains the following fields:

•

Poll Interval

— Defines the interval (in seconds) at which the SNTP server is polled for Unicast information.

The Poll Interval default is 1024 seconds.

•

Enable Receive Broadcast Servers Updates

— Defines whether or not the device monitors the SNTP serv-

ers for Broadcast server time information on the selected interfaces. The possible values are:

–

Enable

— Enables the device to receive Broadcast server updates.

–

Disable

— Disables the device from receiving Broadcast server updates.

•

Enable Receive Anycast Servers Updates

—

Defines whether or not the device polls the SNTP server for

Anycast server time information. If both the Enable Receive Anycast Servers Update and the

Enable Receive

Broadcast Servers Update

fields are enabled, the system time is set according to the Anycast server time

information. The possible values are:

–

Enable

— Enables the device to receive Anycast server updates.

–

Disable

— Disables the device from receiving Anycast server updates.

•

Enable Receive Unicast Servers Updates

— Defines whether or not the device polls the SNTP server for

Unicast server time information. If the

Enable Receive Broadcast Servers Updates

Enable Receive Anycast

Servers Updates

, and

Enable Receive Unicast Servers Updates

fields are all enabled, the system time is set

according the Unicast server time information. The possible values are:

–

Enable

— Enables the device to receive Unicast server updates.

–

Disable

— Disables the device from receiving Unicast server updates.

Summary of Contents for DXS-3250 - xStack Switch - Stackable























































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Web/Installation Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands