D-Link DXS-3250 - xStack Switch - Stackable Web/Installation Manual Download Page 182

Page: 182 / 311

Managing System Files

Page 180

Managing System Files

The

File System Page

provides information about files currently stored on the system, including file names, file

sizes, files modifications, and file permissions. The files system permits managing up to five files and a total file
size of 3MB.

The

File System Page

contains the following fields:

•

File Name

— Indicates the file currently stored in the file management system.

•

Size

— Indicates the file size.

•

Modified

— Indicates the date the file was last modified.

•

Permission

— Indicates the permission type assigned to the file. The possible field values are:

–

Read Only

— Indicates a read-only file.

–

Read Write

— Indicates a read-write file.

•

Remove

— Deletes the file, when checked.

•

Rename

— Permits renaming the file. The file name is renamed in the File Name field.

•

Total Bytes

— Indicates the total amount of the space currently used.

•

Free Bytes

— Indicates the remaining amount of the space currently free.

•

Define the

File Name

field.

•

Click

. The file is updated.

Summary of Contents for DXS-3250 - xStack Switch - Stackable























































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Web/Installation Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands