DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
31
4.
Management
Command Logging
This window is used to display and configure the command logging function. The command logging function is used to
log the commands that have successfully been configured on the Switch via the command line interface. The
command, along with information about the user that entered the command, is included in the system log. Commands
that do not cause a change in the Switch configuration or operation (such as 'show' commands) are not logged.
To view the following window, click
Management > Command Logging
, as shown below:
Figure 4-1 Command Logging Window
The fields that can be configured are described below:
Parameter
Description
Command Logging State
Select to enable or disable the command logging function here.
Click the
Apply
button to accept the changes made.
User Accounts Settings
On this page, user accounts can be created and updated. Active user account sessions can also be viewed on this
page.
There are several configuration options available in the Web User Interface (Web UI). The set of configuration options
available to the user depends on the account’s
Privilege Level
.
NOTE: By default, there are no user accounts created on the Switch.
To view the following window, click
Management > User Accounts Settings
, as shown below:
Summary of Contents for DGS-3130 Series
Page 1: ......
