DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
290
Parameter
Description
•
When the
Any
option is selected, any destination traffic will be
evaluated according to the conditions of this rule.
•
When the
Host
option is selected, enter the destination host IP address
here.
•
When the
IP
option is selected, the
Wildcard
option will also be
available. Enter the group of destination IP addresses by using a
wildcard bitmap. The bit corresponding to the bit value 1 will be
ignored. The bit corresponding to the bit value 0 will be checked.
Source
Select and enter the source MAC address information here. Options to choose
from are
Any, Host, MAC
, and
Wildcard
.
•
When the
Any
option is selected, any source traffic will be evaluated
according to the conditions of this rule.
•
When the
Host
option is selected, enter the source host MAC address
here.
•
When the
MAC
option is selected, the
Wildcard
option will also be
available. Enter the source MAC address and wildcard value in the
spaces provided.
Destination
Select and enter the destination MAC address information here. Options to
choose from are
Any, Host, MAC
, and
Wildcard
.
•
When the
Any
option is selected, any destination traffic will be
evaluated according to the conditions of this rule.
•
When the
Host
option is selected, enter the destination host MAC
address here.
•
When the
MAC
option is selected, the
Wildcard
option will also be
available. Enter the destination MAC address and wildcard value in the
spaces provided.
Source Port
Select and enter the source port value here. Options to choose from are
=, >, <,
≠
, Range
, and
Mask
.
•
When selecting the
=
option, the specific selected port number will be
used.
•
When selecting the
>
option, all ports greater than the selected port,
will be used.
•
When selecting the
<
option, all ports smaller than the selected port,
will be used.
•
When selecting the
≠
option, all ports, excluding the selected port, will
be used.
•
When selecting the
Range
option, the start port number and end port
number selected, of the range, will be used. Alternatively, the port
number(s) can manually be entered in the space(s) provided, if the port
number(s) is/are not available in the drop-down list.
•
When selecting the
Mask
option, the specified source port number and
mask will be used. Enter the source port mask value in the space
provided. The range is from 0x0 to 0xFFFF.
This parameter is only available in the protocol type
TCP
and
UDP
.
Destination Port
Select and enter the destination port value here. Options to choose from are
=,
>, <,
≠
, Range
, and
Mask
.
•
When selecting the
=
option, the specific selected port number will be
used.
•
When selecting the
>
option, all ports greater than the selected port,
will be used.
•
When selecting the
<
option, all ports smaller than the selected port,
will be used.
•
When selecting the
≠
option, all ports, excluding the selected port, will
be used.
•
When selecting the
Range
option, the start port number and end port
number selected, of the range, will be used. Alternatively, the port
Summary of Contents for DGS-3130 Series
Page 1: ......
