DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
210
To view the following window, click
L3 Features > OSPF > OSPFv2 > OSPFv2 Passive Interface Settings
, as
shown below:
Figure 6-40 OSPFv2 Passive Interface Settings Window
The fields that can be configured are described below:
Parameter
Description
Interface Name
Enter the interface name that will be used here. This name can be up to 12
characters long.
Select the
Default
option to use all available interfaces here.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to delete the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
OSPFv2 Area Settings
This window is used to display and configure the OSPFv2 area settings.
To view the following window, click
L3 Features > OSPF > OSPFv2 > OSPFv2 Area Settings
, as shown below:
Figure 6-41 OSPFv2 Area Settings Window
The fields that can be configured in
OSPF Area Settings
are described below:
Parameter
Description
Process ID
Enter the OSPF process ID here. The range is from 1 to 65535.
Area ID
Select and enter the OSPFv2 area ID here. This can be specified in the IP
address format or in the decimal value format. The decimal range is from 0 to
4294967295. The area will be created on an interface if the subnet configured
on the interface falls within the network range specified here.
Range
Select this option to summarize OSPF routes at an Area Border Router (ABR).
Summary of Contents for DGS-3130 Series
Page 1: ......
