DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
239
Parameter
Description
Unit
Select the Switch unit that will be used for this display here.
From Port - To Port
Select the range of ports that will be used for this display here.
Click the
Find
button to find and display entries based on the selections made.
IP Route Filter
Route Map
This window is used to display and configure the route map settings.
To view the following window, click
L3 Features > IP Route Filter > Route Map
, as shown below:
Figure 6-84 Route Map Window
The fields that can be configured are described below:
Parameter
Description
Route Map Name
Enter the route map name here. This name can be up to 16 characters long.
Direction
Select the direction for this rule here. Options to choose from are
Permit
and
Deny
.
•
Permit
- Specifies that routes that match the rule entry are permitted.
•
Deny
- Specifies that routes that match the rule entry are denied.
Sequence ID
Enter the sequence ID for this rule here. The range is from 1 to 65535.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Edit
button to modify the specified entry.
Click the
Delete
button to delete the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Edit
button in the
Match Clauses
column, the following page will appear.
Summary of Contents for DGS-3130 Series
Page 1: ......
