DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
329
Dynamic ARP Inspection
ARP Access List
This window is used to display and configure the dynamic ARP inspection settings.
To view the following window, click
Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Access List
, as
shown below:
Figure 9-44 ARP Access List Window
The fields that can be configured are described below:
Parameter
Description
ARP Access List Name
Enter the ARP access list name used here. This name can be up to 32
characters long.
Click the
Add
button to add a new entry based on the information entered.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specified entry.
After clicking the
Edit
button, the following window will appear.
Figure 9-45 ARP Access List (Edit) Window
The fields that can be configured are described below:
Parameter
Description
Action
Select the action that will be taken here. Options to choose from are
Permit
and
Deny
.
IP
Select the type of sender IP address that will be used here. Options to choose
from are
Any
,
Host
, and
IP with Mask
.
Sender IP
After selecting the
Host
or
IP with Mask
options as the type of
IP
, enter the
sender IP address used here.
Sender IP Mask
After selecting the
IP with Mask
option as the type of
IP
, enter the sender IP
mask used here.
Summary of Contents for DGS-3130 Series
Page 1: ......
