DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
185
Figure 6-4 Proxy ARP Window
The fields that can be configured are described below:
Parameter
Description
Proxy ARP State
Select to enable or disable the Proxy ARP state here.
Local Proxy ARP State
Select to enable or disable the local Proxy ARP state here. This local Proxy
ARP function allows the Switch to respond to the Proxy ARP, if the source IP
and destination IP are in the same interface.
Click the
Edit
button to re-configure the specific entry.
Click the
Apply
button to accept the changes made.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
ARP Table
This window is used to display and configure the ARP table settings.
To view the following window, click
L3 Features > ARP > ARP Table
, as shown below:
Figure 6-5 ARP Table Window
The fields that can be configured are described below:
Parameter
Description
Interface VLAN
Enter the interface VLAN ID used here. This value must be between
1
and
4094
.
IP Address
Select and enter the IP address to display here.
Mask
After the
IP Address
option was selected, enter the mask address for the IP
address here.
Hardware Address
Select and enter the MAC address to display here.
Type
Select the Type option here. Options to choose from are
All
and
Dynamic
.
Mgmt
Select this option to display the Management port information.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Clear All
button to clear all dynamic ARP cache.
Click the
Clear
button to clear the dynamic ARP cache associated with the specific entry.
Summary of Contents for DGS-3130 Series
Page 1: ......
