D-Link DGS-3130 Series Page 80 Web Ui Reference Manual Download

Page: 80 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

To view the following window, click

Management > DHCP > DHCP Relay > DHCP Relay Port Settings

, as shown

below:

Figure 4-524 DHCP Relay Port Settings Window

The fields that can be configured are described below:

Parameter

Description

Unit

Select the Switch unit that will be used for this configuration here.

From Port - To Port

Select the range of ports that will be used for this configuration here.

State

Select to enable or disable the DHCP Relay feature on the specified port(s).

Click the

Apply

button to accept the changes made.

DHCP Local Relay VLAN

This window is used to display and configure local relay on a VLAN or a group of VLANs.
To view the following window, click

Management > DHCP > DHCP Relay > DHCP Local Relay VLAN

, as shown

below:

Figure 4-535 DHCP Local Relay VLAN Window

The fields that can be configured are described below:

Parameter

Description

DHCP Local Relay VID List

Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select

all VLANs.

State

Select this option to enable or disable the DHCP local relay on the specific

VLAN(s).

Click the

Apply

button to accept the changes made.

NOTE: When the state of the DHCP relay port is disabled, the port will not relay or locally relay

received DHCP packets.

Summary of Contents for DGS-3130 Series










































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands

D-Link DGS-3130 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands