D-Link DGS-3130 Series Page 272 Web Ui Reference Manual Download

Page: 272 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

261

The fields that can be configured are described below:

Parameter

Description

Aggregate Policer Name

Enter the aggregate policer name here.

CIR

Enter the Committed Information Rate (CIR) value here. This value must be

between 0 and 10000000 kbps. The committed packet rate is the first token

bucket for the two-rate metering.

Confirm Burst

Enter the confirm burst value here. This value must be between 0 and 16384

Kbytes. The confirm burst value specifies the burst size for the first token

bucket in kbps.

PIR

Enter the Peak Information Rate (PIR) value here. This value must be between

0 and 10000000 kbps. The peak information rate is the second token bucket for

the two-rate metering.

Peak Burst

Enter the peak burst value here. This value must be between 0 and 16384

Kbytes. The peak burst value is the burst size for the second token bucket in

kilobytes.

Confirm Action

Select the confirm action here. The confirm action specifies the action to take

on green color packets. If the confirm action is not specified, the default action

is to

Transmit

. Options to choose from are

Drop

Set-DSCP-Transmit

Set-

1P-Transmit

Transmit

, and

Set-DSCP-1P

•

When selecting the

Drop

option, the packet will be dropped.

•

When selecting the

Set-DSCP-Transmit

option, enter the IP DSCP

value in the space provided. This value sets the IP differentiated

services code point (DSCP) value and transmits the packet with the

new IP DSCP value.

•

When selecting the

Set-1P-Transmit

option, enter the 1P transmit

value in the space provided. This value sets the 802.1p value and

transmits the packet with the new value.

•

When selecting the

Transmit

option, packets will be transmitted

unaltered.

•

When selecting the

Set-DSCP-1P

option, enter the IP DSCP and 1P

transmit values in the spaces provided.

Exceed Action

Select the exceed action here. The exceed action specifies the action to take

on packets that exceed the rate limit. For a two rate policer, if the exceed action

is not specified, the default action is

Drop

. Options to choose from are

Drop

Set-DSCP-Transmit

Set-1P-Transmit

Transmit

, and

Set-DSCP-1P

•

When selecting the

Drop

option, the packet will be dropped.

•

When selecting the

Set-DSCP-Transmit

option, enter the IP DSCP

value in the space provided. This value sets the IP differentiated

services code point (DSCP) value and transmits the packet with the

new IP DSCP value.

•

When selecting the

Set-1P-Transmit

option, enter the 1P transmit

value in the space provided. This value sets the 802.1p value and

transmits the packet with the new value.

•

When selecting the

Transmit

option, packets will be transmitted

unaltered.

•

When selecting the

Set-DSCP-1P

option, enter the IP DSCP and 1P

transmit values in the spaces provided.

Violate Action

Select the violate action here. The violate action specifies the action to take on

packets that violate the normal and maximum burst sizes for singe rate policing.

It specifies the action to take for those packets that did not conform to both CIR

and PIR. For a single rate policer, if the violate action is not specified, it will

create a single-rate two-color policer. For a two-rate policer, if the violation

Summary of Contents for DGS-3130 Series










































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands

D-Link DGS-3130 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands