DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
97
To view the following window, click
Management > SD Card Management > SD Card Execute Settings
, as shown
below:
Figure 4-659 SD Card Execute Settings Window
The fields that can be configured in
Execute Configuration
are described below:
Parameter
Description
File URL
Enter the URL of the file here. If the current directory is not the directory of SD
card file system, then the full file path must be entered.
Increment
Select to enable or disable the increment feature here.
•
When enabled, the current configuration will not be cleared before
executing the configuration.
•
When disabled, the current configuration will be cleared before executing
the configuration.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
SD Card Execute Settings
are described below:
Parameter
Description
Execute Entry Name
Enter the name of the execution entry here. This string can be up to 32
characters long.
Time Range
After clicking the
Edit
button, enter the time range schedule that will be used
here.
Mode
After clicking the
Edit
button, select the mode here. Options to choose from
are:
•
Increase
- Specifies that the current configuration will not be cleared
before executing the configuration.
•
Reset
- Specifies that the current configuration will be cleared before
executing the configuration.
File Name
After clicking the
Edit
button, enter the source filename and path that will be
executed here.
State
After clicking the
Edit
button, select to enable or disable this schedule here.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Edit
button to configure the specific entry.
Click the
Delete
button to remove the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Summary of Contents for DGS-3130 Series
Page 1: ......
