DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
333
To view the following window, click
Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection Log
, as
shown below:
Figure 9-50 ARP Inspection Log Window
The fields that can be configured are described below:
Parameter
Description
Log Buffer
Enter the log buffer value used here. This value must be between 1 and 1024.
By default, this value is 32.
Click the
Apply
button to accept the changes made.
Click the
Clear Log
button to clear the log.
IP Source Guard
IP Source Guard Port Settings
This window is used to display and configure the IP source guard port settings.
To view the following window, click
Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Port Settings
,
as shown below:
Figure 9-51 IP Source Guard Port Settings Window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the IP source guard’s state for the specified port(s)
here.
Validation
Select the validation method used here. Options to choose from are
IP
and
IP-
MAC
. Selecting
IP
means that the IP address of the received packets will be
checked. Selecting
IP-MAC
means that the IP address and the MAC address of
the received packets will be checked.
Click the
Apply
button to accept the changes made.
Summary of Contents for DGS-3130 Series
Page 1: ......
