D-Link DGS-3130 Series Page 203 Web Ui Reference Manual Download

Page: 203 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

192

Figure 6-43 IPv6 Interface (Detail, Interface IPv6 Address) Window

Click the

Delete

button to delete the specified entry.

After selecting the

Neighbor Discover

tab option, at the top of the page, the following page will be available.

Figure 6-54 IPv6 Interface (Detail, Neighbor Discover) Window

After selecting the

DHCPv6 Client

tab option, at the top of the page, the following page will be available.

Figure 6-65 IPv6 Interface (Detail, DHCPv6 Client) Window

Click the

Restart

button to restart the DHCPv6 client service.

The fields that can be configured for

DHCPv6 Client Settings

are described below:

Parameter

Description

Client State

Select to enable or disable the DHCPv6 client service here. Select the

Rapid

Commit

option to proceed with two-message exchange for address delegation.

The rapid-commit option will be included in the Solicit message to request a

two-message handshake.

Click the

Apply

button to accept the changes made.

Loopback Interface

This window is used to display and configure the loopback interface settings. A loopback interface is a software only

interface which always stays in the up status.
To view the following window, click

L3 Features > Interface > Loopback Interface

, as shown below:

Summary of Contents for DGS-3130 Series










































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands

D-Link DGS-3130 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands