D-Link DGS-3130 Series Web Ui Reference Manual Download

Page: 303 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

292

Parameter

Description

Inner CoS

After selecting the CoS value, select the inner CoS value that will be used here.

The range is from

•

Mask

- Enter the inner CoS mask value here. The range is from 0x0 to

0x7.

Time Range

Enter the name of the time range profile that will be used in this ACL rule here.

This name can be up to 32 characters long.

Click the

Apply

button to accept the changes made.

Click the

Back

button to discard the changes made and return to the previous page.

ACL Interface Access Group

This window is used to display and configure the ACL interface access group settings.
To view the following window, click

ACL > ACL Interface Access Group

, as shown below:

Figure 8-177 ACL Interface Access Group Window

The fields that can be configured are described below:

Parameter

Description

Unit

Select the Switch unit that will be used for this configuration here.

From Port - To Port

Select the range of ports that will be used for this configuration here.

Direction

Select the direction here. Options to choose from are

and

Out

Action

Select the action that will be taken here. Options to choose from are

Add

and

Delete

Type

Select the ACL type here. Options to choose from are

IP ACL

IPv6 ACL

MAC

ACL

, and

Expert ACL

ACL Name

Enter the ACL name here. This name can be up to 32 characters long. Click the

Please Select

button to select an existing ACL from the list.

Click the

Apply

button to accept the changes made.

After clicking the

Please Select

button, the following window will appear:

Summary of Contents for DGS-3130 Series










































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands

D-Link DGS-3130 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands