DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
222
To view the following window, click
L3 Features > OSPF > OSPFv3 > OSPFv3 Passive Interface Settings
, as
shown below:
Figure 6-56 OSPFv3 Passive Interface Settings Window
The fields that can be configured are described below:
Parameter
Description
Interface Name
Enter the passive interface name here. This name can be up to 12 characters
long.
Select the
Default
option specify all the interfaces as passive interfaces.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to delete the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
OSPFv3 Area Settings
This window is used to display and configure the OSPFv3 area settings.
To view the following window, click
L3 Features > OSPF > OSPFv3 > OSPFv3 Area Settings
, as shown below:
Figure 6-57 OSPFv3 Area Settings Window
The fields that can be configured in
OSPFv3 Area Settings
are described below:
Parameter
Description
OSPF Area ID
Enter the OSPF area ID used here. It can be specified as an IPv4 address or in
the decimal value format. The decimal range is from 0 to 4294967295.
Range
Select this option to consolidate and summarize routes at an area boundary.
This feature is used only with ABRs. It is used to consolidate or summarize
routes for an area. The result is that a single summary route is advertised to
other areas by the ABR. Routing information is condensed at area boundaries.
External to the area, a single route is advertised for each address range.
Summary of Contents for DGS-3130 Series
Page 1: ......
