DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
94
The fields that can be configured in
Send a Test Mail to All
are described below:
Parameter
Description
Subject
Enter the subject of the email here. This string can be up to 128 characters
long.
Content
Enter the content of the email here. This string can be up to 512 characters
long.
Click the
Apply
button to accept the changes made.
Click the
Delete All
button to delete all the entries found in the display table.
Click the
Delete
button to delete the specified entry.
PPPoE Circuit ID Insertion Global Settings
This window is used to display and configure the PPPoE Circuit ID Insertion Global Settings.
To view the following window, click
Management > PPPoE Circuit ID Insertion Global Settings
, as shown below:
Figure 4-86 PPPoE Circuit ID Insertion Global Settings Window
The fields that can be configured in
PPPoE Circuit ID Insertion Global Settings
are described below:
Parameter
Description
Global PPPoE State
Select this option to enable or disable the PPPoE Circuit ID Insertion on the
Switch. Select Disabled to disable PPPoE Circuit ID Insertion on the Switch.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
PPPoE Circuit ID Insertion Port Settings
are described below:
Parameter
Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port
Select the range of ports that will be used for this configuration here.
State
Select to enable or disable the PPPoE Circuit ID Insertion Port state here.
Circuit ID Type
Specifies that the IP, MAC, or expert UDF format will be used.
Click the
Apply
button to accept the changes made.
Summary of Contents for DGS-3130 Series
Page 1: ......
