D-Link DGS-3130 Series Web Ui Reference Manual Download

Page: 400 / 489

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide

389

Click the

Clear

button to clear the entries based on the information specified.

Click the

Clear All

button to clear the information associated with all entries.

Click the

Show Detail

button to view more detailed information about the link-trace entry.

After clicking the

Show Detail

button, the following page will appear.

Figure 10-16 CFM Linktrace Settings (Show Detail) Window

Click the

Back

button to return to the previous window.

CFM Packet Counter

This window is used to find and display the CFM packet counter information.

To view the following window, click

OAM > CFM > CFM Packet Counter

, as shown below:

Figure 10-17 CFM Packet Counter Window

The fields that can be configured are described below:

Parameter

Description

Unit

Select the Switch unit ID that will be used here.

Port

Select the Switch port that will be used here.

Type

Select the type of counter information that will be cleared or displayed here.

Options to choose from are

All

, and

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Clear

button to clear the counter information based on the information specified.

Click the

Show All

button to display all the entries.

Summary of Contents for DGS-3130 Series










































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands

D-Link DGS-3130 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-3130 Series

Reviews:

Related manuals for DGS-3130 Series

Brands by name

Popular brands