DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
220
Parameter
Description
Host IP
Enter the host IPv4 address here.
Cost
Enter the cost value for the stub entry here. The range is from 1 to 65535.
Select the
Default
option to use the default value, which is 1.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to delete the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
OSPFv3
OSPFv3 Process Settings
This window is used to display and configure OSPFv3 process settings.
To view the following window, click
L3 Features > OSPF > OSPFv3 > OSPFv3 Process Settings
, as shown below:
Figure 6-53 OSPFv3 Process Settings Window
Click the
Edit
button to modify the specified entry.
Click the
Show Detail
button to view more detailed information about the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Edit
button, the following page will appear.
Figure 6-54 OSPFv3 Process Settings (Edit) Window
The fields that can be configured are described below:
Parameter
Description
OSPF State
Select to enable or disable the OSPFv3 state.
Router ID
Enter the router ID for the OSPF process here.
Default Metric
Enter the default metric value for the OSPF process here. The range is from 1
to 16777214. By default, this value is 20. This value is used in conjunction with
the OSPFv3 redistribution feature to enable the current routing protocol to use
the same metric value for all redistributed routes. A default metric helps solve
the problem of redistributing routes with incompatible metrics. Whenever the
Summary of Contents for DGS-3130 Series
Page 1: ......
