DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
60
Click the
Configure
button to configure the DHCPv6 server pool settings.
Click the
Delete
button to remove the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Configure
button, the following page will appear.
Figure 4-40 DHCPv6 Server Pool Settings (Configure) Window
The fields that can be configured in
DHCPv6 Server Pool Configure
are described below:
Parameter
Description
Address Prefix
Select and enter the DHCPv6 server pool IPv6 network address and prefix
length here. For example, 2015::0/64.
Valid Lifetime
Enter the valid lifetime value here. The range is from 60 to 4294967295
seconds. The valid lifetime should be greater than preferred lifetime. If this
value is not specified, then the default valid lifetime will be 2592000 seconds
(30 days).
Preferred Lifetime
Enter the preferred lifetime value here. The range is from 60 to 4294967295
seconds. If this value is not specified, then the default preferred lifetime will be
604800 seconds (7 days).
DNS Server
Enter the DNS server IPv6 address to be assigned to requesting DHCPv6
clients here.
Domain Name
Enter the domain name to be assigned to requesting DHCPv6 clients here.
Click the
Apply
button to accept the changes made.
Click the
Back
button to return to the previous window.
The fields that can be configured in
Static Bindings
are described below:
Parameter
Description
Static Bindings Address
Enter the static binding IPv6 address assign to the specific client here.
Client DUID
Enter the client DHCP Unique Identifier (DUID) here. This string can be up to
28 characters long.
IAID
Enter the Identity Association Identifier (IAID) here. The IAID here uniquely
identifies a collection of non-temporary addresses (IANA) assigned on the
client.
Summary of Contents for DGS-3130 Series
Page 1: ......
