DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
56
The fields that can be configured are described below:
Parameter
Description
Begin Address
Enter the first IPv4 address of a range of addresses to be excluded here.
End Address
Enter the last IPv4 address of a range of addresses to be excluded here.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
DHCP Server Manual Binding
This window is used to display and configure the DHCP server manual binding settings. With a manual binding entry,
the IP address can be either be bound with a client-identifier or bound with the hardware address of the host.
To view the following window, click
Management > DHCP > DHCP Server > DHCP Server Manual Binding
, as
shown below:
Figure 4-34 DHCP Server Manual Binding Window
The fields that can be configured are described below:
Parameter
Description
Pool Name
Enter the DHCP server pool name here. This name can be up to 32 characters
long.
Host
Enter the DHCP host IPv4 address here.
Mask
Enter the DHCP host network subnet mask here.
Hardware Address
Enter the DHCP host MAC address here.
Client Identifier
Enter the DHCP host identifier in hexadecimal notation here. The client
identifier is formatted by the media type and the MAC address.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
DHCP Server Manual Binding Ext
This window is used to display and configure the DHCP server manual binding settings. With a manual binding entry,
the IP address can be either be bound with a client-identifier or bound with the hardware address of the host.
To view the following window, click
Management > DHCP > DHCP Server > DHCP Server Manual Binding Ext
, as
shown below:
Summary of Contents for DGS-3130 Series
Page 1: ......
