DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
76
To view the following window, click
Management > DNS > DNS Name Server Settings
, as shown below:
Figure 4-583 DNS Name Server Settings Window
The fields that can be configured are described below:
Parameter
Description
Name Server IPv4
Select and enter the IPv4 address of the DNS server.
Name Server IPv6
Select and enter the IPv6 address of the DNS server.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
DNS Host Settings
This window is used to display and configure the static mapping entry for the host name and the IP address in the host
table.
To view the following window, click
Management > DNS > DNS Host Settings
, as shown below:
Figure 4-594 DNS Host Settings Window
The fields that can be configured are described below:
Parameter
Description
Host Name
Enter the host name of the equipment.
IP Address
Select and enter the IPv4 address of the equipment.
IPv6 Address
Select and enter the IPv6 address of the equipment.
Click the
Apply
button to accept the changes made.
Click the
Clear All
button to clear the information entered in all the fields on this page.
Click the
Delete
button to remove the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IP Source Interface
This window is used to display and configure the IP source interface settings.
Summary of Contents for DGS-3130 Series
Page 1: ......
