DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
77
To view the following window, click
Management > IP Source Interface
, as shown below:
Figure 4-605 IP Source Interface Window
The fields that can be configured in
IP TFTP Source Interface
are described below:
Parameter
Description
Source Interface State
Select to enable or disable the IP TFTP source interface state here.
Interface Type
After enabling the Source Interface State option, select the interface type here.
Options to choose from are Loopback, Mgmt, and VLAN.
VID
Enter the interface ID here. For loopback interfaces this value is from 1 to 8.
For the management interface (Mgmt) this value can only be 0. For VLAN
interfaces this value is from 1 to 4094.
Click the
Apply
button to accept the changes made.
File System
This window is used to view, manage and configure the Switch file system.
To view the following window, click
Management > File System
, as shown below:
Figure 4-616 File System Window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
Path
Enter the path string.
Click the
Go
button to navigate to the path entered.
Click the
Copy
button to copy a specific file to the Switch.
Click the
c:
hyperlink to navigate the C: drive
Summary of Contents for DGS-3130 Series
Page 1: ......
