manualshive.com logo in svg

CTC Union GSi 600 Series, Installation And Maintenance Manual

Share
Download
CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 71

71

CTC GSi 600

1.

2.

3.

9.  Installation Communication

Menu: "Installer/Defi ne/Communication". 

The back of the display unit has 3 communication ports.

Communication

Display communication ports

Port 1. RS485 port without galvanic protection. For external equipment, e.g. BMS, CTC AXS

Defi ne AXS: 

"Yes" permits BMS via the 

RS485 port and "CTC AXS" 

accessories for wireless 

sensors/WiFi communication, 

refer to the accessory manual 

for installation.

MyUplink (app)

CTC Product

Router

Internet

CTC AXS

CTC SmartControl 
wireless sensor*

Port 2. Network jack (ethernet), see connection information on following page.

Defi ne the app: 

MyUplink: "Yes" enables 

connection to the app.

MyUplink (app)

CTC Product

Router

Internet

Defi ne Web: 

"Yes" permits network 

connection, the "CTC 

Remote" screen mirror feature 

and BMS function with 

remote control via network 

cable to local network.

CTC Remote (screen mirroring for phone/
tablet/computer)

CTC Product

Router

Port 3. Communication between the product’s electrical cabling and display: Factory fi tted.

*CTC SmartControl is also available with a gateway connected to Port 3. 

Refer to the CTC SmartControl accessories manual.

Summary of Contents for GSi 600 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands