manualshive.com logo in svg

CTC Union GSi 600 Series, Installation And Maintenance Manual

Share
Download
CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 120

120

CTC GSi 600 

12.10.10 Def. SMS

Activate 

No (Yes/No)

If "Yes" is selected, the menus below are displayed:

Level of signal 

The signal strength of the reception is shown here.

Phone Number 1 

The first activated phone number is shown here.

Phone Number 2 

The second activated phone number is shown here.

Hardware Version 

The hardware version of the SMS accessory is shown 

here.

Software version 

The software version of the SMS accessory is shown 

here.

NB:

 For more information about the SMS function, 

refer to the "Installation and Maintenance Manual" for 

CTC SMS.

12.10.11  Def. SmartControl

SmartControl is a separate series of wireless 

accessories. 

SmartControl 

No (Yes/No)

If "Yes" is selected, SmartControl accessories can be 

connected to the heating circuit. Refer to the connection 

procedure in the separate SmartControl Accessories 

manual.

12.10.12 Def. Current sensor

Current sensor 

Yes (Yes/No) 

Select "Yes" is current sensors are to be connected to 

the system.

For more information, refer to the "Current Sensors" 

section in the "Installer/Settings" chapter.

Menu: "Installer/Define/SmartControl".

Menu: "Installer / Define /  SMS".

Summary of Contents for GSi 600 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands