CTC Union GSi 600 Series, Installation And Maintenance Manual

Page: 19 / 136

19
CTC GSi 600
3. Parameter list
Factory
setting
Heating circuit
Max primary flow °C 60
Min primary flow °C Off
Heating, mode Auto
Heating mode, ext.
Heat mode, schedule
Heat off, outside °C 18
Heating off, time 120
Inclination 50
Inclination adjustment 0
Night reduction down to °C 5
Room temp. lowered, Night
reduction °C
-2
Room temp. lowered, Holiday -2
Primary flow reduced, Night
reduction °C
-3
Primary flow reduced, Holiday -3
Alarm room temp °C 5
SmartGrid Low Price °C 1
SmartGrid Overcapacity °C 2
Max time heating 20
Charge pump % 90
Drying period mode Off
Drying period temp °C 25
Drying period mode Off
Heat pump
Compressor Blocked
Brine pump Auto
Compressor stop at brine °C -5
Tariff HP No
Tariff HP schedule
SmartGrid block HP No
Start at degree minute -60
Max rps (GSi 608/612/616) 65/100/80
Ext. Noise reduction rps 50
Noise reduction, schedule
Passive cooling brine pump on Yes
Factory
setting
Electric heater
Max el. heater kW* 9.0
Max el. heater DHW kW 0
Start at degree minute -500
Diff step, degree minute -50
Main fuse A 20
Conv. factor current sensor 1
Tariff EL No
Tariff EL schedule
SmartGrid block immersion No
DHW
DHW program Economy/
Normal/
Comfort
Max time DHW 30
Charge pump % 90
SmartGrid Low Price °C 10
SmartGrid Overcapacity °C 10
Run time DHW circ. 4
Time DHW circ. 15
DHW circ. schedule
Time Extra DHW Remote Contr. 0.0
HC2 Mixing valve close 120
External heat source (EHS)
Charge start °C 70
Stop diff (°C) 5
SmartGrid block cap. No
Passive cooling
Room temperature passive cooling
°C
25.0
SmartGrid Low Price °C 1
SmartGrid Overcapacity °C 2
Ext. block passive cooling Off
Block passive cooling schedule
*The setting range ("Max electric heater power") varies
depending on the heat pump model. See the “Electrical
installation” chapter.