CTC Union GSi 600 Series, Installation And Maintenance Manual

Page: 108 / 136

108 CTC GSi 600
K22 A14 & A25 230 V
K23 A24 & A25 230 V
K24 G33 & G34
K25 G73 & G74
12.10 Defi ne
Part of the "Installer / Defi ne/Remote Control" menu.
Designation Terminal block
position
Connection type
Extra-low voltage
(<12V)
Extra-low voltage
(<12V)
The table shows the remote control inputs K22-K25 on the
relay card.
Menu: "Installer / Defi ne /Remote Control".
The "Defi ne" menus specify which components and
subsystems the system consists of.
12.10.1 Def. Remote control
This chapter describes all remote control functions; how
they are set up and how they are used.
The "Installer/Defi ne/Remote Control" menu defi nes
how the remote control inputs should be activated by
specifying one of the following three modes of activation
in the "Input" column of this menu:
• a terminal block K22-K23 on the relay card (A2)
has power or terminal block K24-K25 is closed.
There are two 230 V inputs and two low voltage
ports. See table below.
• wireless accessories in the CTC SmartControl
series consist of wireless sensors and control units
that control signals for temperature, humidity and
carbon dioxide level.
• BMS control where control signals are transmitted
via the BMS interface.
If you want a function to recur during weekdays, you
can set when the function should be active/inactive in a
weekly program.