manualshive.com logo in svg

CTC Union GSi 600 Series, Installation And Maintenance Manual

Share
Download
CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 107

107

 

CTC GSi 600

Menu: "Installer/Settings/Load My Settings".

12.9.12  Save my settings

Custom settings can be saved to "Bank" 1-3 and on a 

USB drive here. The "USB" row is greyed out until the 

USB drive is installed. The rows show the date and time 

of saved settings.

Press "OK" to confirm.

12.9.13  Load settings

Custom settings can be saved to "Bank" 1-3 and on a 

USB drive here. The "USB" row is greyed out until the 

USB drive is installed. The rows show the date and time 

of saved settings.

Press "OK" to confirm.

12.9.14  Load factory settings

The product is supplied with the factory values set. 

Saved settings in "Bank" 1-3 are deleted when 

factory settings are restored. The selected language is 

recovered.

Press OK to confirm. 

Summary of Contents for GSi 600 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands