manualshive.com logo in svg

CTC Union GSi 600 Series, Installation And Maintenance Manual

Share
Download
CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 105

105

 

CTC GSi 600

Menu: "Installer/Settings/Communication".

Menu: "Installer/Settings/Communication/BMS".

Menu: "Installer/Settings/Communication/Internet".

12.9.8  Settings Communication

12.9.8.1  Ethernet

DHCP 

Yes (Yes/No)

"Yes" enables automatic connection to the network.

If "No", custom router settings (IP address, Netmask 

and Gateway) as well as DNR setting must be made.

Auto DNR 

Yes (Yes/No)

If "Yes", default DNR server settings are used. If "No", 

custom DNR settings must be made.

SNTP server

Option for custom SNTP server settings.

Connection speed 

10mbit

Connection speed is specified here.

The factory-set connection speed is 10 Mbps.

12.9.8.2  BMS

MB address 

1 (1...255)

Adjustable "1-255".

Baud rate 

9600 (9600/19200)

Possible settings: "9600" or "19200".

Parity 

Even (Even/Odd/None)

Possible settings: "Even", "Odd" or "None".

Stop bit 

1 (1/2) 

Possible settings: 1 or 2.

Modbus TCP Port 

502 (1...32767)

This menu bar is displayed if "Modbus TCP" is defined 

in the "Ethernet" row in the "Installer/Define/Remote 

Control” menu.

12.9.8.3  MyUplink

This menu is used for pairing with the MyUplink app. To 

request a connection code/token, press "Get token", 

confirm with "OK".

This is only clickable if the display is connected to the 

server.

The following values are displayed:

•  "Serial": Serial number 

"Token": Token/connection code

These must be entered in MyUplink when pairing.

Menu: "Installer/Settings/Communication/MyUplink".

Summary of Contents for GSi 600 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands