CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 104

Page: 104 / 136

104

CTC GSi 600

12.9.7

Settings Passive cooling

Room temperature passive cooling °C

25.0

(10.0...30.0)

This is used to set the desired room temperature for

cooling.

SmartGrid Low Price °C

1 (Off, 1...5 )

Read more in the "Installer/Define/Remote control/

SmartGrid" menu.

SmartGrid Overcapacity °C

2 (Off, 1...5)

Read more in the "Installer/Define/Remote control/

SmartGrid" menu.

Ext. block passive cooling

No (No/Yes)

Selecting "Yes" enables blocking of passive cooling. The

function can be used to turn off cooling with the help of

a humidity sensor when there is a risk of condensation.

Block passive cooling sched.

This menu is used to schedule the weekday periods

during which passive cooling should be blocked. This

schedule is repeated every week.

This menu bar is displayed if a "Schedule" has been

defined for the "Block Passive Cooling" function.

For more information, refer to:

• chapter "Weekly Program" for schedule setting.

• section "Def. Remote Control" of the

"Installer / Define" chapter for defining the remote

control function.

Menu: "Installer/Settings/Passive Cooling".

Summary of Contents for GSi 600 Series









































































































































Search results

Summary of Contents for GSi 600 Series

Reviews:

Brands by name

Popular brands

CTC Union GSi 600 Series, Installation And Maintenance Manual

Search results

Summary of Contents for GSi 600 Series

Reviews:

Brands by name

Popular brands