manualshive.com logo in svg

CTC Union GSi 600 Series, Installation And Maintenance Manual

Share
Download
CTC Union GSi 600 Series Installation And Maintenance Manual Download Page 39

39

CTC GSi 600

Left-side connection
(Use rear outlet)

Connection, back

Right-side connection
(Use front outlet)

Rear installation

1. 

Use through-hole A

2. 

Fit the "brine out" hose.

3. 

Push the hose to the side under the tank.

4. 

Fit the "brine in" hose.

7.1.1 

Connection options

Left-side installation

1. 

Use the rear through-hole.

2. 

Push in the "brine out" hose from the side.

3. 

Pull out the hose from the front while pushing 

in the hose from the side.

4. 

Fit the "brine in" hose.

5. 

Push in the hose from the side.

6. 

Pull out the hose from the front while pushing 

in the hose from the side.

7. 

Fit the "brine out" hose.

If the hose is pulled out from the front without 

pushing it in from the side at the same time, the 

hose will be wedged with the insulation stuck under 

the tank and the insulation could be ruined.

Right-side installation

1. 

Use the rear through-hole.

2. 

Fit the "brine out" hose.

3. 

Fit the "brine in" hose.

Summary of Contents for GSi 600 Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands