Corghi ERCO 3222N CEL, Operator'S Manual

Page: 56 / 174

22
3.7 INTENDED USE
The vehicle lifts described in this manual are designed and manufactured for lifting vehicles for inspection, maintenance and/
or repair purposes only.
• The vehicle lift should be used only for lifting vehicles within the load capacity limits given in the IDENTIFICATION
PLATE (2, Fig. 5A) and in the paragraph 1.3 "LOAD DISTRIBUTION" (Fig. 3).
CAREFULLY READ THE INSTRUCTIONS GIVEN IN THIS MANUAL BEFORE USING THE LIFT
3.6 LIFT IDENTIFICATION AND PICTOGRAMS DESCRIPTION
The safety signals (Fig. 5) described in this manual are applied onto the lift (Fig. 6), and warn about unsafe and hazardous situations.
Decals shall be kept clean and, if detached or damaged, they shall be immediately changed.
Carefully read the meaning of the safety signals, and memorise it:
1 Instructions plate 4 Column greasing
2 CE plate 5 Max. load
A Serial No. I Power 6 Load distribution
B Type L Pressure 7
Danger signal. Before carrying out any maintenance
operation, stop the equipment and consult the user’s
manual
C Model M Absorption 8 Danger signal. Fall possibility. Do not get up on the
runways
D Max. Load 9 Danger signal. Risk of feet shearing.
E Ground 10 Danger signal. Voltage on.
F Manuf.year
G Voltage
H Frequency
3 Manufacturer's logo
Each lift is supplied with the identification plates (2, Fig.5A) relevant to the different versions.
Data (A) and (B) have always to be mentioned for any service and spare parts need.