![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055055.webp)
O
PERATION
4-13
UGE048/1103
CSC Combination Puller/Cutter
Raise
will increase the preset by 1. The key can be pressed
once for each 1 increment required or held down to scroll up.
Releasing the key will freeze the preset at the last value then
press enter.
Lower
will decrease the preset by 1. The key can be pressed
once for each 1 decrement required or held down to scroll
down. Releasing the key will freeze the preset at the last value
then press enter.
Numeric keys
Key in the number of blades mounted and press enter. If the
value entered is out of range an error message with the valid
range will be displayed.
Enter or Delete?
If the keyed in number is correct press the enter key for it to
be accepted and return to the Blade Select or Main Mode
Screen. If it is wrong press the delete key and the previous
preset will reappear.
FUNCTION AREAS
Additional information on how to access and navigate these
screens can be found in the operator display overview section
of this manual.
Menu
fixed function key is used to access the Function Areas
from any main mode screen. There are two Function Area
screens. The user can toggle between the two screens with the
Next and Prev fixed function keys.
C
UTTER
C
ONTROL
I
NSTRUCTIONS
F
UNCTION
A
REAS
SELECT FUNCTION >
Blade
Test
Mode
< SELECT FUNCTION
Min
Parts
CPM
C
UTTER
C
ONTROL
I
NSTRUCTIONS
B
LADE
C
OUNT
S
CREEN
CONTINUED
Continued