![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055114.webp)
CSC Combination Puller/Cutter
UGE048/1103
6-16
T
ROUBLESHOOTING
R
EPLACING
S
AFETY AND
P
ROXIMITY
S
WITCHES
Three safety switches are included in CSC cutter sections: a
keyed safety switch on the knife guard, and a proximity
switch on each cutter bushing. A failure in any of these
switches prevents the puller/cutter from running.
●
Safety Switch
If you suspect a problem with the keyed safety switch on
the knife guard, check for loose or damaged wires.
Replace the switch if wires appear to be undamaged.
●
Proximity Switches
The proximity switches on the cutter bushings have LEDs
that light when the bushing is sensed. If an LED does not
light when both the bushing are in place:
Check for loose or damaged wires.
Remove the cutter bushing
and make sure the prox-
imity switch is properly positioned, i.e. 0.010" from
the bushing surface.
Remove the proximity switch
by loosening the set
screw. Test it by bringing an object close to the sen-
sor when the power is turned on. If the LED does not
light, replace the proximity switch.
1
2
3