Turn the main power disconnect to the off
position.
Remove the upper and lower belt guards:
●
Remove the screws
attaching guards to unit (four
each: top, bottom, front and rear).
●
Disconnect the safety cable
(upper guard).
●
Lift off and remove guard.
T
ESTING
B
ELT
T
ENSION
1
2
Check belt tension.
Use a tension-measuring tool.
Belts should be just tight enough to prevent slipping, and
the gap between the upper and lower belts should be even
across the width of the belt.
NOTE
: It is important to have the proper belt ten-
sion. Loose belts result in belt and product slippage;
over-tightened belts result in distorted product and
can lead to premature bearing failure.
3
UGE048/1103
CSC Combination Puller/Cutter
M
AINTENANCE
5-13
Continued