![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055078.webp)
4-36
O
PERATION
UGE048/1103
CSC Combination Puller/Cutter
M
AKING
A
DJUSTMENTS
D
URING
O
PERATION
F
OR THE
C
UTTER
There are several adjustments you can make during normal
cutting. These adjustments include:
●
In Timer mode
, adjust the time between cuts
●
In Encoder and Follower modes
, adjust the length
●
In Product mode,
adjust the hold-off time
●
In Flywheel mode,
adjust blade speed (CSC only)
●
Adjust blade speed in all modes except
Follower
●
Perform a manual cut and reset the length
by press-
ing the manual cut button at any time during on-demand
cutting. Pressing Reset/Test has no effect during contin-
uous cutting.
●
C
ount the total number of cuts
by pressing the Total
On/Off soft key. Use the Reset button to return the count
to zero. This feature is useful for collecting samples dur-
ing a production run.
●
C
ount the batches of cuts
by pressing the Total On/Off
soft key. Use the Reset button to return the count to
zero. This feature is useful for collecting samples during
a production run.
●
Stop cutting temporarily
by setting Cut On/Off to off.
This allows you to view the cutting blade (through the
window) or perform other tasks without shutting down
the cutter.
NOTE
: While the controller will allow you to
switch modes during operation, this is not
recommended.