![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055107.webp)
C
UTTER
O
PERATIONAL
P
ROBLEMS
Symptom
◆
Blade speed does
not change when new
speed is entered into
the control.
◆
Cutter mode selec-
tion does not change
cut mode.
◆
The park (home)
position is drifting,
i.e. the blade parks
further away from
the original park
position.
Possible cause
There is a communication
failure between the con-
trol and drive.
There is a communication
failure between the con-
trol and drive.
The coupling between the
servo motor and the
Micron reducer has
slipped.
The Trantorque coupling
has slipped.
Solution
Check wiring for loose connec-
tions and tighten.
Check wiring for loose connec-
tions and tighten.
See Checking the Motor/
Reducer Assembly, Section 6.
Refer to the Trantorque instruc-
tions, Section 5.
UGE048/1103
CSC Combination Puller/Cutter
T
ROUBLESHOOTING
6-9