![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055094.webp)
CSC Combination Puller/Cutter
UGE048/1103
5-14
M
AINTENANCE
Adjust belt tension, if necessary.
Adjust tension by turning the threaded tension rods.
Keep tension on front and back edges, top and bottom
belts as even as possible:
4
Fine tune tension:
●
Lower the belts
to a gap of about 1/8" (3 mm). See
Adjusting Belt Gap, Section 3
.
●
From the upstream end of the belts
, look down
the length of the belts at the gap between the belts.
If the gap is not even, adjust the tension until the
gap is even and measures 1/8”. The shape of the gap
should not be concave (over-tightened) or convex
(too loose).
●
Check tension and readjust as necessary.
5
T
ESTING
B
ELT
T
ENSION
C
ONTINUED