![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055137.webp)
A
PPENDIX
F-1
This table shows the settings for each control parameter set at
the factory. The parameters are set either to the default setting,
or to a setting specific to your requirements (Customer col-
umn). If you change any value, record it in this column. Keep
these values up-to-date so you can easily restore your puller to
normal operation if the memory is corrupted.
P
ULLER
C
ONTROL
S
ETTINGS
Code Parameter
Range
Default
Customer
Setpoint Control
01
Primary Setpoint 1
0000-9999
02
Primary Setpoint 2
0000-9999
03
Secondary Setpoint 1
0000-9999
04
Secondary Setpoint 2
0000-9999
05
Jog Setpoint
0000-9999
06
Output Setpoint
0000-9999
Alarms and Limits
10
Minimum Limit
0000-9999
11
Maximum Limit
0000-9999
12
Low Alarm
0000-9999
13
High Alarm
0000-9999
14
Error Alarm 1, ramped
0000-9999
15
Error Alarm 2, scaled
0000-9999
Acceleration and Deceleration
16
Acceleration time
000.0-600.0
17
Deceleration time
000.0-600.0
Phase Control
18
Lag Pulse Limit
0-9999
19
Lead Pulse Limit
0-9999
Scaling
20
Engineering units
000.0-9999
(primary setpoint)
21
Engineering units
000.0-9999
(secondary setpoint)
22
Engineering units
000.0-9999
(primary display)
23
Engineering units
000.0-9999
(secondary display)
Phase Control
29
Recovery multiplier
0-100
Scaling
30
PPR (external
1-9999
reference input)
31
PPR (feedback input)
1-9999
60
32
PPR (auxiliary input)
1-9999
33
Max RPM (external
1-9999
reference input: primary mode)
34
Max RPM (feedback:
1-9999
1750
primary mode)
35
Max RPM (auxiliary
1-9999
input: primary mode)
If the control's memory is cor-
rupted by electrical noise or
static, you may need to reset
the control parameters.
UGE048/1103
P
ULLER
C
ONTROL
S
ETTING