CSC Combination Puller/Cutter
UGE048/1103
3-10
I
NSTALLATION
Turn the main power disconnect to the off
position.
Remove the upper and lower belt guards:
●
Remove the screws
attaching guards to unit
(four each: top, bottom, front and rear).
●
Disconnect the safety cable
(on the upper guard).
●
Lift off and remove guard.
A
DJUSTING
B
ELT
T
ENSION
1
2
Check belt tension.
Use a tension-measuring tool.
Belts should be just tight enough to prevent slipping,
and the gap between the upper and lower belts should be
even across the width of the belt. NOTE: Loose
belts result in belt and product slippage; over-tightened
belts result in distorted product and can lead to prema-
ture bearing failure.
3
Continued