![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055049.webp)
O
PERATION
4-7
UGE048/1103
CSC Combination Puller/Cutter
Numeric keys
Key in the batch required and press enter. If you require a
batch of 50 parts you must key in 50 and then press enter.
Enter or Delete?
If the keyed in number is correct press the enter key for it to
be accepted and return to the Main screen. If it is wrong press
the delete key and the previous preset will reappear.
Batch Pre-Alarm Preset Screen
By pressing the soft key located under the word Alarm on the
Batch Area Screen, the preset for the Batch pre-warn Alarm
is available.
The number shown is the current alarm preset. A cursor will
appear in the least significant digit. The user has a choice of
ways to adjust this number. See entering the batch preset
above. Please note: This value must be less than the batch
preset.
Exit or Prev
, if no change is required press Exit or Prev to
return to the Main screen.
LENGTH SCREEN
By pressing the soft key located under the word Length on
the Encoder, Follower or Auto Mode Main Screen, the preset
for the Length counter is available.
Additional information on
how to access this screen can be found in the operator dis-
play overview in Appendix E of this manual.
The number shown is the current length preset value, i.e. the
length to cut the product. A cursor will appear in the least sig-
nificant digit. The user has a choice of ways to adjust this
number. Pressing the #Prst/Softkey3 accesses the number of
presets to run screen. This feature is only available with the
multiple preset/batch option.
ALARM 000,000 pcs
Exit
C
UTTER
C
ONTROL
I
NSTRUCTIONS
L
ENGTH
S
CREEN
LENGTH#1 0000.000 in.
Exit
#Prst
Continued
C
UTTER
C
ONTROL
I
NSTRUCTIONS
B
ATCH
S
CREEN
C
ONTINUED