![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055103.webp)
P
ULLER
O
PERATION
P
ROBLEMS
UGE048/1103
CSC Combination Puller/Cutter
T
ROUBLESHOOTING
6-5
Symptom
◆
The puller
‘creaks’ while run-
ning.
◆
The puller does
not start.
Possible cause
The belt is too tight.
The bearings are failing.
The E-stop button is
pushed in.
Solution
Check the belt tension; loosen
if necessary.
See Maintenance
section 5.
Replace the bearings.
Pull out the E-stop button.
(Make sure it clicks into posi-
tion.)