![background image](http://html1.mh-extra.com/html/conair/320csc2/320csc2_user-manual_2649055100.webp)
B
EFORE
B
EGINNING
CSC Combination Puller/Cutter
UGE048/1103
6-2
T
ROUBLESHOOTING
A F
EW
W
ORDS
OF
C
AUTION
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal injury.
This equipment should only be installed, adjust-
ed, and serviced by qualified technical person-
nel who are familiar with the construction, oper-
ation, and potential hazards of this type of
machine.
All wiring, disconnects, and fuses should be
installed and adjusted by qualified electrical
technicians in accordance with electrical codes
in your region. Always maintain a safe ground.
Do not operate the equipment at power levels
other than what is specified on the machine
serial tag and data plate.
WARNING: Electrical hazard
Before performing maintenance or repairs on
this product, disconnect and lock out electrical
power sources to prevent injury from unexpect-
ed energization or start-up. A lockable device
has been provided to isolate this product from
potentially hazardous electricity.
You can avoid most problems by following the recommended
installation, operation and maintenance procedures outlined in
this User Guide. If you have a problem, this section will help
you determine the cause and tell you how to fix it.
Before you begin troubleshooting:
❒
Find any wiring, parts, and assembly diagrams that
were shipped with your equipment. These are the best
reference for correcting a problem. The diagrams will
note any custom features or options not covered in this
User Guide.
❒
Verify that you have all instructional materials related
to the puller. Additional details about troubleshooting
and repairing specific components are found in these
materials.
❒
Check that you have manual for other equipment con-
nected in the system. Troubleshooting may require
investigating other equipment attached to, or connect-
ed with the puller.