VARO Powerplus POWX230, Quick Start Manual

Page: 1 / 9

POWX230
EN
Copyright © 2021 VARO
P a g e | 1
www.varo.com
1 APPLICATION .................................................................................. 3
2 DESCRIPTION (FIG A) .................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 3
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1 Work area ................................................................................................................ 4
5.2 Electrical safety ....................................................................................................... 4
5.3 Personal safety ....................................................................................................... 4
5.4 Power tool use and care ......................................................................................... 5
5.5 Service ..................................................................................................................... 5
6 ADDITIONAL SAFETY INSTRUCTIONS FOR TILE CUTTERS ..... 5
6.1 Power supply ........................................................................................................... 5
6.2 Diamond blades ...................................................................................................... 6
7 ASSEMBLY ...................................................................................... 6
7.1 Mounting of disc (fig 1a, 1b &1 c) .......................................................................... 6
7.2 Assembly of dividing knife and protective guard (fig 2) ....................................... 6
7.3 Mounting of guard / angle guard. (fig 3) ................................................................ 6
7.4 Inserting the water reservoir (fig 4) ........................................................................ 6
8 OPERATION ..................................................................................... 6
8.1 Switching on and off ............................................................................................... 6
8.2 Angle adjustment of the table (fig 5) ...................................................................... 6
8.3 Water reservoir ........................................................................................................ 6
8.4 Performing straight and angle cuts ....................................................................... 7
8.4.1 Straight cuts .............................................................................................................. 7
8.4.2 Angle cuts ................................................................................................................. 7
9 CLEANING AND MAINTENANCE ................................................... 7
9.1 Cleaning................................................................................................................... 7
9.2 Maintenance ............................................................................................................ 7
10 TECHNICAL DATA .......................................................................... 7
11 NOISE ............................................................................................... 8