Session Problem 1
The Gateway-ST does not recognize the access names you specify.
Solution:
The access names you want to use might not be defined on your Gateway-ST.
Use the following SNANCP command to obtain a list of access names defined
on your Gateway-ST:
SNANCP> SHOW KNOWN ACCESS NAMES
For full information about access name characteristics, use the following
command:
SNANCP> SHOW KNOWN ACCESS NAME CHARACTERISTICS
Use the following SNANCP command to define access names on the Gateway-
ST node:
SNANCP> SET ACCESS NAME
access-name-id
For information on using SNANCP commands to define access names, refer to
the DECnet SNA Gateway-CT and ST Management book.
To ensure that the Gateway-ST is initialized with the correct access names
next time it is loaded, edit the SNA configuration file on the load host:
SYS$COMMON:[SNA$CSV]SNAGATEWAY_gateway-node-name_SNA.COM
1–42 Solving DECnet SNA Gateway for Synchronous Transport Problems
