Initialization Problem 11
You receive an error message when you try to use a component or access name
that you defined by editing the configuration file.
Solutions:
Check the following areas:
1.
You might have defined the component (line, circuit, PU, LU, or server) or
access name correctly but have forgotten to reboot the Gateway-ST after
correcting the definitions. Check NETSERVER.LOG for errors. Reboot the
Gateway-ST using the NCP TRIGGER command from a load host.
For Phase IV, enter
NCP> TRIGGER NODE
gateway-node-name
For Phase V, enter
NCL> BOOT MOP CLIENT
gateway
2.
You might have an error in the component or access name definition in the
SNA configuration file. Correct any errors.
To ensure that the components and access names are defined next time the
Gateway-ST is loaded, correct the problem by editing the following file:
SNAGATEWAY_gateway-node-name_SNA.COM
Solving DECnet SNA Gateway for Synchronous Transport Problems 1–35
