Index
A
Access names, 1–42
problems with, 1–35
B
BIND request, 1–47
C
Cable loopback test, 2–10
Channel problems
PU does not become active, 1–31
Circuit level loopback test, 2–8
Circuit level traces, 3–1 to 3–2
Circuit problems, 1–29
Circuit states
not active, 1–45
OFF, 1–45
Components
problems with, 1–35
Controller loopback test, 2–9
Crash dump
Gateway system hung, 4–1
Crash dumps, 4–1
D
DEC MicroServer
allocation of communications ports on,
E–1
communications ports and data speeds,
E–1
display panel, C–1
DEC MicroServer (cont’d)
dump display, C–4
dump sequence, C–4
normal dump display for, C–4
retry dump display for, C–4
error codes, C–5
halt codes, C–5
power up
normal load display for, C–3
retry load display for, C–3
power up sequence, C–2
DEC MicroServer loopback tests, 2–10
DEC MicroServer power up failure, 1–3
DEC MicroServer problems
wrong software loaded, 1–21
DEC MicroServer remote console commands,
D–1 to D–11
DECnet configuration database
DEC MicroServer entries for, 1–22, 1–23
load host entries for, 1–18
DECnet problems, 1–37 to 1–40
when abnormal event logged, 1–38
when Gateway-ST in restricted ON state,
1–40
when Gateway-ST system unreachable,
1–39
Diagnostic tools
event messages as, 1–40, A–2
IBM sense codes as, 1–46, A–6
loopback tests as, 2–1
modem tests as, 2–14
OpenVMS error messages as, A–5
traces as, 3–1
up-line dumps as, 4–1
Index–1
