2.
Insert the power cord.
3.
Release the DUMP switch when the display shows the following value:
1
Once you have performed these three steps, you can set a new password by
using the SET PASSWORD remote console command.
D.10 Getting Help
To get a listing of the commands and their formats, use the HELP command:
>>>HELP
This command produces a display similar to the following:
Available Commands -
B[oot]
DU[mp]
HA[lt]
H[elp] [More,Test]
SE[t] PASSWORD
SH[ow] {PASSWORD,STATE}
TE[st] keyword [/keyword_qualifiers...]
UPPERCASE - required letters, lowercase - optional letters
[...] - Optional, {...} - Select One
The remote console recognizes additional commands, but these are for use by
Digital support people only.
DEC MicroServer Facilities for Problem Solving D–11
