1.2 Initialization Problems
Problem
Number
Symptom
1
The Gateway-ST software cannot be loaded.
2
Software with an unexpected configuration is loaded.
3
You see "aborted service request" events on the load host when you try
to boot the Gateway-ST.
4
NCP TRIGGER works, but LOAD does not.
5
No event messages are displayed at the load host when the Gateway-ST
is booted.
6
The Gateway-ST boots, but the line counters indicate less than normal
activity or no activity.
7
The Gateway-ST boots, but the circuit remains in the on-starting state.
8
The PU does not become active.
9
Errors occur in the Gateway-ST initialization process.
10
The Gateway-ST node does not recognize the DECnet node name you
specify.
11
You receive an error message when you try to use a component or access
name that you defined by editing the configuration file.
12
Event logging reports that the SNAINI object is unknown at the remote
node.
Solving DECnet SNA Gateway for Synchronous Transport Problems 1–15
