Figure 1–1 Setting the Voltage Selector
Synchronous Ports
LKG−2945−89R
DUMP
LINE 0
LINE 1
LINE 2
LINE 3
Display
Circuit
Breaker
Voltage
Setting
Dump
Switch
Ethernet
Port
Power
Socket
If the circuit breaker trips every time the unit is powered up, check the
following:
•
Make sure the main voltage selector on the control panel is correctly
set for your supply voltage (see Figure 1–2).
NOTE
Figure 1–2 shows the control panel of the four-port DEC MicroServer.
•
If necessary, change the setting on the voltage selector, and try to
power up the unit again.
•
If the selector is correctly set but the breaker still trips, unplug the
unit and call Digital service representative.
1–4 Solving DECnet SNA Gateway for Synchronous Transport Problems
