ComAp InteliMains 210 BTB Global Manual Download

Page: 129 / 576

InteliMains 210 Global Guide

129

Firmware upload

Point 1 - controller detects that USB Flash Drive has been inserted.

If the communication via USB B is running controller will not detect the USB memory key.

On the other hand if the USB memory key was detected, communication via USB B port is not possible.

Point 2 - controller is in OFF mode

All operations with USB memory key are possible only in OFF mode

Point 3 - Conditions for firmware upload with current configuration

The new firmware compatible with the version of the configuration in the controller has been detected

(and there is no new configuration file).

Detection is based on name of firmware - required name: "InteliMains210-M.N.P.B.bin"

There can be stored more firmwares on the USB Flash Drive. Controller automatically select the

compatible firmware with highest version.

Point 4 - Pop-up message

Confirmation of firmware upload with current configuration

Point 5 - Firmware upload

Current archive is download to USB Flash Drive (Name = SN_YYMMDDHHMM).

New firmware is uploaded into the controller without the change of the configuration

History record "USB Flash Drive FW upgrade" is made

Confirming file (.txt) on USB Flash Drive is made (Name = SN_YYMMDDHHMM)

Content: Serial number, Year/Date/Time, Upgrade to the FW "Name of the new FW" successful.

Confirmation pop-up message: "FW upgrade success"

Configuration upload

Point 1 - controller detects that USB Flash Drive has been inserted.

If the communication via USB B is running controller will not detect the USB memory key.

On the other hand if the USB memory key was detected, communication via USB B port is not possible.

Point 2 - controller is in OFF mode

All operations with USB memory key are possible only in OFF mode

Point 9 - conditions for new configuration upload

The new configuration compatible with the version of the firmware in the controller has been detected

(and there is no new firmware file).

Detection is based on name of configuration - required name: "InteliMains210-Genset name-

M.N.P.B.aig3"

There can be only one configuration file

Point 10 - Pop-up message

Confirmation of configuration upload with current firmware

Summary of Contents for InteliMains 210 BTB

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for InteliMains 210 BTB

Reviews:

Related manuals for InteliMains 210 BTB

Brands by name

Popular brands

ComAp InteliMains 210 BTB, Global Manual

Search results

Summary of Contents for InteliMains 210 BTB

Reviews:

Related manuals for InteliMains 210 BTB

Brands by name

Popular brands